Dental Crown Cost, Types and Procedure


Alternatives

Cracked or broken teeth can cause functional and cosmetic problems, and one option for repairing this damage is a crown. Crowns can restore a tooth’s size, shape and strength, improve the appearance of a smile, relieve pain, prevent further damage and increase functionality by providing proper bite alignment.

In This Guide

Average Crown Cost by Type

Cost of a Dental Crown   
TypeRangeWith InsuranceNo Insurance
Porcelain Fused to Metal$500 to $1500$650$1100
Metal (Noble or High Noble)$750 to $2400$900$1400
All Porcelain$1000 to $3000$1000$1600
  • Porcelain fused to metal crowns cost an average of $500 to $1500 per tooth, averaging $1100 without insurance and $650 with.
  • Metal (noble or high noble) crowns cost between $750 to $2400, averaging $1400 without insurance and $900 with.
  • At the higher end, all-porcelain crowns cost between $1000 to $3000, averaging $1600 without insurance and $1000 with due to the greater time and skill required to install them.

Dental insurance can cover up to 50% of the cost if it is required for medical reasons. Cosmetic procedures are typically not covered.

Factors That Affect the Cost

The fees involved for the procedure depend on several factors, including:

  • Local rates (geographic location)
  • Type/material and company that fabricated it
  • Experience and training of the dentist
  • Size, location and condition of the original tooth
  • Need for additional procedures such as root canals, bone grafts or implant screws
  • Dental insurance coverage and co-pays
  • Any additional fees such as X-rays or specialist consultations

Cost of Dental Crown in Other Countries

CountryLowHigh
Albania$96
$231
Australia
$963
$1,286
Bulgaria
$112
$416
Costa Rica
$327
$438
Croatia
$219
$350
Egypt
$99
$241
Hong Kong
$707
$1,929
Hungary
$212
$354
India
$79
$197
Ireland
$625
$1,065
Italy
$714
$924
Jordan
$185
$346
Lebanon
$261
$570
Malaysia
$424
Malta
$323
$574
Mexico
$262
$414
Oman
$302
$545
Philippines
$136
$376
Poland
$238
$507
Singapore
$661
$1,169
South Africa
$313
$548
Spain
$372
$492
Thailand
$289
$509
Turkey
$129
$258
United Arab Emirates
$557
$644
Vietnam
$169
$402

What is a Crown?

crown illustrationA crown (“cap”) is a tooth-shaped dental restoration that is used for capping or completely encasing a single damaged tooth or dental implant. Also called “dental caps” and “porcelain jackets”, they can be made from a variety of materials and are permanently bonded to their foundation with dental cement, avoiding the need for tooth extraction, bridges, partials or dentures. They cannot be used for full-mouth restoration.

Why are Teeth Capped?

They are commonly used to:

  • Protect a tooth that is weak from wear and tear and/or decay from further damage
  • Hold a fractured or broken tooth together
  • Cover a large filling that involves half of the tooth or more
  • Support a dental bridge
  • Restore a tooth after a root canal procedure to prevent fracturing
  • Hide severely discolored or misshapen teeth when veneers cannot
  • Cap off and complete a dental implant procedure
  • Relieve the pain experienced as a result of cracked tooth syndrome

Types of Crowns & Their Benefits

The types available are differentiated by the materials used to make them, each with its own purposes and benefits.

Stainless Steel
Stainless SteelThis type of crown is generally used as a temporary solution, most often in pediatric dentistry. Because primary teeth (baby teeth) are necessary for the positioning of permanent teeth, stainless steel ones are used to protect them from further decay until they fall out naturally.

Metal
Commonly a gold alloy, palladium, or other base-metal alloy such as chromium or nickel, metal crowns are typically used for back molars as individuals want their metallic color to be out-of-sight. They have thinner walls, so they require less tooth reshaping and removal prior to fitting. They stand up better to chewing, rarely chip, last the longest and cause very little damage to opposing teeth.

Porcelain Fused to Metal
Porcelain Fused to MetalConsisting of a metal shell with a heat-fused porcelain exterior, these crowns are used for both front and back teeth since they can be color-matched and appear more natural. They are more susceptible to chipping and can cause stress or damage to opposing teeth. Sometimes the metal underneath the porcelain can be seen as a dark line near the bottom edge of the crown. If the gum recedes, it can become even more noticeable at the gum line.

All-Ceramic
All CeramicMade from a number of natural materials including types of feldspar and zirconia, all-ceramic crowns look the most lifelike as they provide a closer color match. They are also biocompatible, making them an option for those who are allergic to metal. Similar to porcelain, they are less durable and can crack or chip.

All-Resin
These are made from composite resin, most commonly acrylic polymers mixed with silicon dioxide. They are the most affordable option. The acrylics used can be color-matched to natural teeth, but they are less durable and more susceptible to fractures.

The Procedure

First Visit – Consultation
During the first visit, a dentist will examine the tooth and its root to determine whether or not a crown is a suitable method of restoration and if additional procedures will be required to make it a success. For example, a tooth with a compromised root can cause an infection or injure the tooth’s pulp, in which case a root canal might be necessary. The examination may involve analyzing X-rays and impressions of the patient’s bite. Depending on the severity or nature of the situation, the dentist may refer the patient to a specialist such as a periodontist, oral surgeon or orthodontist for further examination. Once it has been decided that capping a tooth is the best option, the dentist will proceed with preparation.

Procedure

Preparation
The procedure begins by numbing the tooth with local anesthesia, followed by preparing the tooth so that it can support the crown. This includes reshaping the tooth by either filing down the enamel or applying a filling to build it up if it is too damaged or decayed. The amount removed or added depends on the type that will be used. A dental impression is taken and sent to a lab that uses it to design and manufacture it. An impression of the surrounding teeth is also taken to ensure that it perfectly integrates with your bite. A temporary crown made of acrylic is placed to protect the tooth until you return. It typically takes 2-3 weeks for it to be fabricated.

Dental Impression

Temporary Care
Between visits it is important to take care of the temporary cap in order to protect the prep work performed underneath it. The design of the permanent crown is based on the size, shape and condition of the tooth before the temporary crown is placed, so it is important to take a few precautions. This includes avoiding sticky, chewy or hard foods that may dislodge the temporary crown, pulling floss out rather than up during cleaning to avoid pulling the crown off and chewing on the opposite side of the mouth.

Second Visit
During the second visit, the dentist will remove the temporary cap and a local anesthetic may or may not be administered. After removal, the dentist will check the fit and color before permanently cementing it in place. This is done with precision, as any gaps between the crown and the tooth can allow bacteria to grow, causing further decay and increasing the likelihood of a fracture.

The process may take more than 2 visits or require longer sessions if your situation requires special procedures such as a root canal, orthodontic treatment or gum treatment.

Recovery and Post-Procedure Care

After the procedure, patients may experience some sensitivity to hot and cold. This can be alleviated by brushing with toothpaste designed for sensitive teeth. If you experience pain or discomfort when biting down, it may not be aligned properly and another trip to the dentist is necessary. Unfortunately, crowned teeth are not decay-proof. They susceptible to fracture and gum disease just like any other tooth. Proper and consistent dental care is the best way to maintain the crown, including brushing, flossing and a healthy diet. They usually last between 5 and 15 years. The primary factors that affect how long they last are your oral hygiene and any mouth-related habits including clenching/grinding, biting fingernails and chewing ice.

Potential Problems

After the procedure, a number of problems can occur that require returning to the dentist for repairs or replacement restorations. Crowns can chip, become loose and even fall off. Usually seen in all-porcelain crowns, chipping can be repaired with composite resin. A replacement may be necessary if the damage is extensive. A crown can become loose or detach due to improper placement, a lack of cement or cement washing out from under it. These issues can usually be fixed by re-cementing it in place. If not, a new crown will be made. If the problem is ignored for too long, the underlying tooth may experience further damage, in which case the procedure must be redone.

They can take some getting used to, but crowns eventually look, feel and function just like normal teeth. If you have any concerns or questions after the procedure, contact your dentist.

References

What to Read Next

Over to You

Have you had a tooth crowned? Has your dentist recommended you get one? Share your experience by leaving a comment!

What others are saying

  1. Nowadays, a lot of people in the USA fly elsewhere for what is increasingly popular, known as dental tourism. Thailand, India, Mexico are just some of the places you can go, where you can save massive amounts of money on great dental care.

    I had one tooth crack, and now need one crown. For a little while, before I went to the dentist, I was worried I’d need a lot done. If I did, I’d already be reserving flights to Cancun, where they have a few great dental offices that are known for dental tourism with incredibly good rates, a location near the major tourist hotels, dentists that all speak fluent English, filtered water in their plumbing systems for Americans, etc. You can fly to Cancun, stay in a great hotel, enjoy a holiday (when you’re not recovering from dental office time), and still save boatloads of money on dental work.

    Fortunately, I only need one crown, so I’ll get it done near home. For me the break-even would have been around 2 to 3 crowns. And if the price is the same, hell, I’m goin’ to Cancun!

    If I needed an entire mouth’s worth… I’d probably fly to Goa, India (a beach town) and get it all done there for ~15-20c on the dollar.

    Reply
  2. I decided to only do the top teeth,(see previous post – 2/23/16), for “only” $19,000. The first day of the procedures, dentist was putting in temporary teeth, some thin translucent stuff I was to wear a couple months to see how I liked the fit. After “gluing” it in, he asked me to bite together. The teeth were not aligned. Dentist said “I set it wrong”. You what? Then he repeated this statement,
    “I set it wrong.” He proceded to remove it, with chiseling, drilling, and prying, with me in great discomfort. When I could talk, I said “You set it wrong?” Then I said how many times do you have to try to get it right?
    I was not happy. First procedure, and he does it “wrong”? He did not say “It did not set right.” He said, three times, “I set it wrong.”
    WTF.
    This showed me my discomfort with the whole plan and dentist.
    I decided to leave.
    I have gone back to my old dentist.
    Think twice about cosmetic dentistry.

    Reply
  3. There is possibly slight error in the types of crowns listed here based on what I’ve read at other places. My dentist recommended a zirconia crown. It is a white metal and is currently the strongest available material. Some people do consider it more ceramic than metal, but it is not weak and liable to chip like other ceramics.

    Reply

Leave a Reply to Melissa Cancel reply